With climate change, climatic optima are shifting poleward more rapidly than tree migration processes, resulting in a mismatch between species distributions and bioclimatic envelopes. Temperate hardwood tree species may take advantage of the release of climate constraints and forest management to migrate into the boreal forest. Here, we use the SORTIE-ND forest simulation model to determine the potential for the persistence of three temperate species (sugar maple, red maple and yellow birch) when introduced at seedling stage in typical balsam fir–paper birch (BF–PB) bioclimatic domain stands of eastern Canada, quantifying the consequences on the native species composition. SORTIE-ND is a spatially explicit, individual-based forest stand model that simulates tree growth, regeneration and mortality. We performed a novel parameterization of the SORTIE-ND tree growth equation allowing for the inclusion of climate modifiers on tree growth. After validating our model with data from permanent forest inventory plots, we modeled the dynamics of unharvested stands at different successional stages, as well as post-harvest stands, after the addition of sugar maple, red maple and yellow birch seedlings at different densities. Our results show that current BF–PB domain climate conditions do not limit growth and survival of temperate species in boreal stands. Of the temperate species introduced, sugar maple had the lowest ability to grow and survive by the end of the simulation. Species assemblages of host stands were impacted by the presence of temperate species when the addition of seedlings was above 5000 temperate seedlings per hectare at the beginning of the simulation. For stands that were recently clear cut, temperate seedlings were unable to grow due to intense competition from aspen regeneration. Our results suggest that both current climate and competitive interactions between temperate species and boreal species should not impede the ability of temperate species to grow and survive in the BF–PB domain.

Sapwood characteristics, such as sapwood area as well as thermal and hydraulic conductivity, are linked to species-specific hydraulic function and resource allocation to water transport tissues (xylem). These characteristics are often unknown and thus a major source of uncertainty in sap flow data processing and transpiration estimates because bulk rather than species-specific values are usually applied. Here, we analyzed the sapwood characteristics of fifteen common tree species in eastern North America from different taxonomic (i.e., angiosperms and gymnosperms) and xylem porosity groups (i.e., tracheid-bearing, diffuse- or ring-porous species) and we assessed how uncertainties in sapwood characteristics involved in sap flow calculations are propagated in tree water use estimates. We quantified their sapwood area changes with stem diameter (allometric scaling) and thermal conductivity. We combined these measurements with species-specific values of wood density and hydraulic conductivity found in the literature and assessed the role of wood anatomy in orchestrating their covariation. Using an example sap flow dataset from tree species with different xylem porosity, we assessed the sensitivity of tree water use estimates to sapwood characteristics and their interactions. Angiosperms (ring- and diffuse-porous species), with specialized vessels for water transport, showed a steeper relationship (scaling) between tree stem diameter and sapwood area in comparison to gymnosperms (tracheid-bearing species). Gymnosperms (angiosperms) were characterized by lower (higher) wood density and higher (lower) sapwood moisture content, resulting in non-significant differences in sapwood thermal conductivity between taxonomic and xylem porosity groups. Clustering of species sapwood characteristics based on taxonomic or xylem porosity groups and constraining these parameters could facilitate more accurate sap flow calculations and tree water use estimates. When combined with an increasing number of sap flow observations, these findings should improve tree- and landscape-level transpiration estimates, leading to more robust partitioning of terrestrial water fluxes.

Balsam fir (Abies balsamea) is the most vulnerable species to the spruce budworm (Choristoneura fumiferana), one of the most devastating defoliators in the world. For decades, pest managers have advocated for reducing its abundance in the landscape to minimize losses to the spruce budworm (SBW). Although reduction of fir occurred during the endemic phase of the SBW cycle, there is little information about the extent to which this general principle (reduction of fir) was applied during an outbreak and whether it occurs at both stand and landscape levels. The objective of this paper is to compare the effect of insect and harvest disturbances on forest structure during the 1970–80s outbreak in Québec. We evaluate whether, (i) forest management activities targeted fir forests and whether patch size of host species influences management or SBW disturbance, (ii) SBW outbreaks and logging have similar or divergent effects on forest composition. Although data are from an earlier outbreak, they are at a scale rarely studied and will be useful in guiding decisions made at larger scales in the current and future outbreaks. Our results show that spruce was targeted preferentially by harvesting (up to 69% of plots) during the outbreak period, while it represented less than one third of plots defoliated by the SBW. On the other hand, fir stands represented up to 75% of plots that were defoliated by the SBW but less than 35% of plots that underwent harvesting. Harvesting targeted large blocks of spruce forest more than large blocks of fir-dominated forest while the opposite was observed for the SBW. In terms of regeneration, SBW tends to reduce fir and favor spruce recruitment, along with non-host species, whereas the opposite tendency was observed following harvesting. In terms of spatial organization of stands, our results support the suggestion that small stands of fir and large stands of spruce undergo the least SBW damage. Thus, in order to attenuate SBW impacts in the future, efforts should be made to ensure that spruce recruitment is favored and that its abundance increases at both the stand and landscape scale.

Despite great concern for drought-driven forest mortality, the effects of frequent low-intensity droughts have been largely overlooked in the boreal forest because of their negligible impacts over the short term. In this study, we used data from 6,876 permanent plots distributed across most of the Canadian boreal zone to assess the effects of repeated low-intensity droughts on forest mortality. Specifically, we compared the relative impact of sequential years under low-intensity dry conditions with the effects of variables related to the intensity of dry conditions, stand characteristics, and local climate. Then, we searched for thresholds in forest mortality as a function of the number of years between two forest surveys affected by dry conditions of any intensity. Our results showed that, in general, frequent low-intensity dry conditions had stronger effects on forest mortality than the intensity of the driest conditions in the plot. Frequent low-intensity dry conditions acted as an inciting factor of forest mortality exacerbated by stand characteristics and environmental conditions. Overall, the mortality of forests dominated by shade-tolerant conifers was significantly and positively related to frequent low-intensity dry conditions, supporting, in some cases, the existence of thresholds delimiting contrasting responses to drought. In mixtures with broadleaf species, however, sequential dry conditions had a negligible impact. The effects of frequent dry conditions on shade-intolerant forests mainly depended on local climate, inciting or mitigating the mortality of forests located in wet places and dominated by broadleaf species or jack pine, respectively. Our results highlight the importance of assessing not only climate-driven extreme events but also repeated disturbances of low intensity. In the long term, the smooth response of forests to dry conditions might abruptly change leading to disproportional mortality triggered by accumulated stress conditions. Forest and wildlife managers should consider the cumulative effects of climate change on mortality to avoid shortfalls in timber and habitat.

{Changing climates are altering the structural and functional components of forest ecosystems at an unprecedented rate. Simultaneously, we are seeing a diversification of public expectations on the broader sustainable use of forest resources beyond timber production. As a result, the science and art of silviculture needs to adapt to these changing realities. In this piece, we argue that silviculturists are gradually shifting from the application of empirically derived silvicultural scenarios to new sets of approaches, methods and practices, a process that calls for broadening our conception of silviculture as a scientific discipline. We propose a holistic view of silviculture revolving around three key themes: observe, anticipate and adapt. In observe, we present how recent advances in remote sensing now enable silviculturists to observe forest structural, compositional and functional attributes in near-real-time, which in turn facilitates the deployment of efficient, targeted silvicultural measures in practice that are adapted to rapidly changing constraints. In anticipate, we highlight the importance of developing state-of-the-art models designed to take into account the effects of changing environmental conditions on forest growth and dynamics. In adapt, we discuss the need to provide spatially explicit guidance for the implementation of adaptive silvicultural actions that are efficient, cost-effective and socially acceptable. We conclude by presenting key steps towards the development of new tools and practical knowledge that will ensure meeting societal demands in rapidly changing environmental conditions. We classify these actions into three main categories: re-examining existing silvicultural trials to identify key stand attributes associated with the resistance and resilience of forests to multiple stressors, developing technological workflows and infrastructures to allow for continuous forest inventory updating frameworks, and implementing bold, innovative silvicultural trials in consultation with the relevant communities where a range of adaptive silvicultural strategies are tested. In this holistic perspective, silviculture can be defined as the science of observing forest condition and anticipating its development to apply tending and regeneration treatments adapted to a multiplicity of desired outcomes in rapidly changing realities.}

Climate models project warmer summer temperatures will increase the frequency and heat severity of droughts in temperate forests of Eastern North America. Hotter droughts are increasingly documented to affect tree growth and forest dynamics, with critical impacts on tree mortality, carbon sequestration, and timber provision. The growing acknowledgement of the dominant role of drought timing on tree vulnerability to water deficit raises the issue of our limited understanding of radial growth phenology for most temperate tree species. Here, we use well-replicated dendrometer band data sampled frequently during the growing season to assess the growth phenology of 610 trees from 15 temperate species over six years. Patterns of diameter growth follow a typical logistic shape, with growth rates reaching a maximum in June, and then decreasing until process termination. On average, we find that diffuse-porous species take 16–18 days less than other wood-structure types to put on 50% of their annual diameter growth. However, their peak growth rate occurs almost a full month later than ring-porous and conifer species (ca. 24 ± 4 days; mean ± 95% credible interval). Unlike other species, the growth phenology of diffuse-porous species in our dataset is highly correlated with their spring foliar phenology. We also find that the later window of growth in diffuse-porous species, coinciding with peak evapotranspiration and lower water availability, exposes them to a higher water deficit of 88 ± 19 mm (mean ± SE) during their peak growth than ring-porous and coniferous species (15 ± 35 mm and 30 ± 30 mm, respectively). Given the high climatic sensitivity of wood formation, our findings highlight the importance of wood porosity as one predictor of species climatic sensitivity to the projected intensification of the drought regime in the coming decades.

Predicted increases in temperature and aridity across the boreal forest region have the potential to alter timber supply and carbon sequestration. Given the widely-observed variation in species sensitivity to climate, there is an urgent need to develop species-specific predictive models that can account for local conditions. Here, we matched the growth of 270,000 trees across a 761,100?km2 region with detailed site-level data to quantify the growth responses of the seven most common boreal tree species in Eastern Canada to changes in climate. Accounting for spatially-explicit species-specific responses, we find that while 2?°C of warming may increase overall forest productivity by 13?±?3% (mean?±?SE) in the absence of disturbance, additional warming could reverse this trend and lead to substantial declines exacerbated by reductions in water availability. Our results confirm the transitory nature of warming-induced growth benefits in the boreal forest and highlight the vulnerability of the ecosystem to excess warming and drying.

Increasing access to extensively replicated and broadly distributed tree-ring collections has led to a greater use of these large data sets to investigate climate forcing on tree growth. However, the number of chronologies added to large accessible databases is declining and few are updated, while chronologies are often sparsely distributed and are more representative of marginal growing environments. On the other hand, National Forest Inventories (NFI), although poorly replicated at the plot level as compared to classic dendrochronological sampling, contain a large amount of tree-ring data with high spatial density designed to be spatially representative of the forest cover. We propose an a posteriori approach to validating tree-ring measurements and dating, selecting individual tree-ring width time series, and building average chronologies at various spatial scales based on an extensive collection of ring width measurements of nearly 94,000 black spruce trees distributed over a wide area and collected as part of the NFI in the province of Quebec, Canada. Our results show that reliable signals may be derived at various spatial scales (from 37 to 583,000 km²) from NFI increment core samples. Signals from independently built chronologies are spatially coherent with each other and well-correlated with independent reference chronologies built at the stand level. We thus conclude that tree-ring data from NFIs provide an extraordinary opportunity to strengthen the spatial and temporal coverage of tree-ring data and to improve coordination with other contemporary measurements of forest growth to provide a better understanding of tree growth-climate relationships over broad spatial scales.