This study investigated the potential of secondary sludge (SS) as urea–formaldehyde (UF) co-adhesive for particleboard manufacturing. Three proportions of SS from three conventional pulping processes were added in the formulation of particleboard manufacturing. A 33 factorial design was used. All panels were tested for thickness swell (TS), linear expansion (LE), internal bond strength (IB), flexural modulus of elasticity (MOE), flexural modulus of rupture (MOR) and formaldehyde emission. Results indicated that particleboards made with SS from thermomechanical pulp (TMP) and kraft pulp (Kraft) met the ANSI standards for LE, IB, MOE, and MOR (with 7 and 9 % UF). However, the TS of panels made with SS was higher than that of control panels and adding SS to the formulation affected negatively this property. Most of the properties studied in the particleboards made with SS from chemical–thermomechanical pulping (CTMP) process failed to meet the ANSI standards. The main advantage of using SS as co-adhesive is the reduction of formaldehyde emission, in the best case here, about 50 %, with CTMP sludge added, of the particleboards.