Azmul Huda, Pierre Périnet, Yves Fortin, Roger E. Hernandez, Ahmed Koubaa, Alain Cloutier. (2018). Phenotypic and genotypic correlations for wood properties of hybrid poplar clones of Southern Quebec. Forests. 9(3):140. 10.3390/f9030140 lien

Claudia B. Caceres, Roger E. Hernandez, Ahmed Koubaa. (2017). Effects of log position in the stem and commercial thinning on jack pine chip dimensions produced by a chipper-canter. European Journal of Wood and Wood Products. 75(3): 359-373. 10.1007/s00107-016-1062-x lien

Claudia B. Caceres, Svetka Kuljch, Roger E. Hernandez, Ahmed Koubaa. (2016). Effects of commercial thinning, log position in the stem, and cutting width on the surface quality of cants produced by a chipper-canter. Wood Material Science and Engineering.. 1-8. 10.1080/17480272.2016.1232308 lien

Roger E. Hernandez, Angela M. Llavé, Ahmed Koubaa. (2014). Effects of cutting parameters on cutting forces and surface quality of black spruce cants. European Journal of Wood and Wood Products. 72(1):107-116. 10.1007/s00107-013-0762-8 lien

Azmul Huda, Yves Fortin, Roger E. Hernandez, Alain Cloutier, Ahmed Koubaa. (2014). Variation of the physical and mechanical properties of hybrid poplar clones. BioResources. 9(1):1456-1471.  lien

Svetka Kuljch, Roger E. Hernandez, Angela M. Llavé, Ahmed Koubaa. (2013). Effects of cutting direction, rake angle, and depth of cut on cutting forces and surface quality during machining of balsam fir. Wood and Fiber Science. 45(2):196-205.  

Azmul Huda, Roger E. Hernandez, Alain Cloutier, Ahmed Koubaa. (2012). Anatomical properties of selected hybrid poplar clones grown in southern Quebec. BioResources. 7(3):3779-3799.  lien

Roger E. Hernandez, Svetka Kuljch, Ahmed Koubaa. (2010). Effect of cutting width and cutting height on the surface quality of black spruce cants produced by a chipper-canter. Wood and Fiber Science. 42(3):1-12.