Nitrogen is an essential nutrient for plant functioning, photosynthesis, and metabolic activities. In terrestrial settings, nitrogen is not always sufficiently available because its basic form (N2) must be fixed into other forms, such as nitrate and ammonium, to be usable by plants. Adding nitrogenous fertilizer to soils may provide a means of increasing forest productivity. Ammoniacal nitrogen (N-NH3), an effluent produced during gold extraction, requires mining companies to manage its long-distance and costly transportation offsite for disposal. Applying this nitrogenous effluent, in its treated form of ammonium sulfate (ammoniacal nitrogen from mine water was converted into ammonium sulfate locally), to regional forest stands could provide a cost-effective and more environmentally sound means of managing this waste product and enhance forest productivity. Here, we conducted greenhouse- and field-based experiments to evaluate ammonium sulfate fertilization on black spruce (Picea mariana) and jack pine (Pinus banksiana) seedling growth. We assigned five treatments, varying in terms of the fertilizer concentration and presence/absence of biochar, to seedlings in greenhouse trials. We also applied various concentrations of ammonium sulfate to an 8-year-old black spruce plantation in Abitibi-Témiscamingue, Québec. We found that black spruce and jack pine seedlings experienced greater growth than the controls in terms of the stem diameter (32–44%), seedling height (21–49%), and biomass (86–154%). In the field experiment, we observed 37% greater volumetric growth in plots receiving medium-level fertilization than the control. Although nitrogen fertilization lowered the soil pH, essential nutrients increased to favor greater seedling growth. Thus, ammonium sulfate, derived from local mining effluent, appears to offer a suitable alternative for enriching nitrogen-limited boreal soils and increasing tree growth. This application could benefit both regional mining industries and forest management bodies.

Ammoniacal nitrogen (N-NH3) is one of the pollutants that has adverse effects on the environment and is present in most effluents generated by mining operations. Therefore, mining companies must manage it to keep it below the regulated discharge criteria to avoid environmental contamination. In this context, the present study aims to valorize N-NH3 in the form of ammonium sulphate ((NH4)2SO4) for the manufacture of biochar pellets used as growth substrates for the production of forest seedlings. The biochar was first produced by fast pyrolysis, at 320 °C, and different recipes of pellets were then prepared to evaluate their hardness, binder type and content, humidity and durability. The optimal granule chosen was composed of biochar, corn starch and canola oil. Six combinations of different compositions were then prepared as substrates for black spruce growth: (1) Peat (P); (2) Peat and bulk biochar (PB); (3) Peat and bulk biochar impregnated with ammonium sulfate (PBAS); (4) Peat and biochar pellets impregnated with water (PBPeW); (5) Peat and biochar pellets impregnated with an ammonium sulfate solution (PBPeAS); (6) Peat, biochar pellets impregnated with ammonium sulfate and perlite (PBPeASPer). The effects of these substrates on the growth of black spruce seedlings, as well as fertilizer leaching, were measured. The results show that seedling biomass is equivalent to the control for the granular treatment, but higher biomass was obtained with bulk biochar (PB). This shows that a quarter of peat could be replaced by biochar to obtain similar or even better results of biomass yield and, consequently, solve part of the supply issue. As to plant nutrition, no tendency was observed for the experiments apart from the higher proportion of Ca in spruce needles. The prepared biochar-based pellet substrate appears to not only be advantageous for spruce production but also for other uses such as golf courses, forestry producers and horticultural nurseries using conventional fertilizers and peat as growing media. In addition, these approaches could help the Abitibi-Témiscamingue region in Québec, Canada to build a local circular economy.

There is growing interest in low-cost, efficient materials for the removal of organic contaminants in municipal and industrial effluents. In this study, the efficiency of biochar and activated biochar, as promising adsorbents for phenol removal, was investigated at high (up to 1500 mg L?1) and low concentrations (0.54 mg L?1) in synthetic and real effluents (from wood-residue deposits in Québec), respectively. The performance of both materials was then evaluated in batch adsorption experiments, which were conducted using a low solid/liquid ratio (0.1 g:100 mL) at different phenol concentrations (C0?=?5–1500 mg L?1), and at 20 °C. Activated biochars presented higher phenol adsorption capacity compared to biochars due to their improved textural properties, higher micropore volume, and proportion of oxygenated carbonyl groups connected to their surface. The sorption equilibrium was reached within less than 4 h for all of materials, while the Langmuir model best described their sorption process. The maximum sorption capacity of activated biochars for phenol was found to be twofold relative to biochars (303 vs. 159 mg g?1). Results also showed that activated biochars were more effective than biochars in removing low phenol concentrations in real effluents. In addition, 95% of phenol removal was attained within 96 h (although 85% was removed after 4 h), thus reaching below the maximum authorized concentration allowed by Québec’s discharge criteria (0.05 mg L?1). These results show that activated biochars made from wood residues are promising potential adsorbent materials for the efficient treatment of phenol in synthetic and real effluents.